EW-DX SK | EW-DX SK 3-PIN bodypack transmitter
177
Information on the bodypack transmitter’s
display
You can view the following information on the transmitter dis-
play.
Further information
Link name:
You can assign a name to the radio link in the transmitter’s
menu (see „Name menu item“).
Alternatively, you can assign the name in the receiver’s menu
and then synchronize it to the transmitter (see „Ch 1 / Ch 2 ->
Name menu item“).
Frequency:
You can manually set the frequency of the radio link in the
transmitter’s menu (see „Frequency menu item“).
The frequency of the radio link can also be set manually in the
receiver’s menu (see „Ch 1 / Ch 2 -> Frequency menu item“) or
via the Auto Setup function (see „Ch 1 / Ch 2 -> Scan / Auto
Setup menu item“) and then synchronized to the transmitter.
To Next Page
Loading...
