Sennheiser Evolution Wireless Digital - Page 223

Usability
222
Usability
Why won’t my transmitter synchronize with my receiver?
• Briefly press the SYNC button on both devices, but don’t
press too long („Establishing a radio link | Synchronizing the
receiver and transmitter“)
• The two devices must have the same frequency range („Fre-
quency ranges“)
Is there a way to check the battery status of the transmitter
other than on the receiver?
• The Check function allows you to check the battery status
on the transmitter.
• EW-D SKM-S: „Checking the battery status of the transmit-
ter (Check function)“
• EW-D SK: „Checking the battery status of the transmitter
(Check function)“
How do I know if my transmitter is switched on?
• The transmitter’s LINK LED lights up.
• EW-D SKM-S: „Meaning of the LEDs“
• EW-D SK: „Meaning of the LEDs“
• EW-DX SKM(-S): „Meaning of the LEDs“
• EW-DX SK (3-PIN): „Meaning of the LEDs“
My LINK LED is steady or flashing yellow. What does that
mean?
• EW-D EM: „Meaning of the LEDs“
• EW-D SKM-S: „Meaning of the LEDs“
• EW-D SK: „Meaning of the LEDs“
• EW-DX EM 2: „Meaning of the LEDs“
• EW-DX SKM(-S): „Meaning of the LEDs“
• EW-DX SK (3-PIN): „Meaning of the LEDs“