Sennheiser RS165 - Transmitter Power Connection; Connecting to AC Wall Outlet

Putting the RS 165 into operation
RS 165 | 15
Connecting the transmitter to an AC wall outlet
1 Select a suitable country adapter and slide it onto the power supply
unit until it locks firmly in place.
2 Connect the power supply unit connector to the power input socket of
the t
ransmitter.
3 Plug the power supply unit into an AC wall outlet.
The TR st
atus LED lights up for a second. The transmitter is in
standby mode.
1
3
2
STANDBY
US
AU
EU
UK