Sennheiser RS165 - Pairing Headphones to Transmitter; Re-establishing Headphone Pairing

Putting the RS 165 into operation
22 | RS 165
Pairing headphones to the transmitter
The headphones and the transmitter enclosed in this package have been
paired from the factory. The following procedure is only necessary if you
have cleared all pairing information from your wireless headphone system
and you want to revive the lost pairing, or if you want to pair another set
of headphones to the transmitter.
You can connect up to 2 paired headphones simultaneously with your
TR 165 transmitter.
왘 Place the headphones on the headphones holder of the transmitter for
a s
econd.
The Charge status LED on the transmitter lights up red. The
headphones are paired to the transmitter.
1s