Putting the VMX 200 into operation
VMX 200 | 11
If pairing is not successful within 5 minutes, the headset automatically
returns to searching mode. If the headset has been paired before, it will try
to connect to the last connected device after 5 minutes.
왘 On the mobile phone, start a search for Bluetooth devices (see the
instruction manual of your mobile phone) and follow the instructions
on the mobile phone’s display.
Using the VMX 200 with two Bluetooth devices
You can use the VMX 200 simultaneously with two connected Bluetooth
devices (Multi Connection).
In order for this to function, at least two Bluetooth devices must already
be paired with the headset. To do so, follow the instructions in the pre-
ceding chapter “Pairing the VMX 200 with a Bluetooth device”.
왘 Switch the headset on. The headset automatically tries to establish
a Bluetooth connection to the two last connected Bluetooth devices.
To Next Page
Loading...
