Need help?Do you have a question about the Sensia NUFLO MC-I and is the answer not in the manual?
Details on keypad functions for the MC-I Portable Rate Meter in Run Mode, including saving data and resetting totals.
Keypad functions for the MC-I Portable Rate Meter in Calibrate Mode for setting units, calibration factor, and other parameters.
Step-by-step example demonstrating the calibration of the MC-I Portable Rate Meter for liquid measurement using standard units.
Demonstrates calculating and inputting a divisor for liquid flow measurement with non-standard units.
Detailed example of calculating and entering a divisor for gas flow measurement with non-standard units.
Step-by-step instructions for replacing the alkaline battery pack in the MC-I Portable Rate Meter.
Detailed procedure for replacing the circuit assembly of the MC-I Portable Rate Meter.
Instructions for replacing the switchplate assembly on the front panel of the MC-I Portable Rate Meter.
General| Type | Flow Computer |
|---|---|
| Accuracy | ±0.1% of reading |
| Enclosure Rating | NEMA 4X, IP66 |
| Flow Meter Compatibility | Turbine, Coriolis |
| Communication Protocols | Modbus, HART |
| Enclosure | IP66 |
| Output | 4-20 mA, pulse |
| Material | Stainless steel and aluminum |
| Operating Temperature | -40°C to 85°C |
| Repeatability | ±0.05% of reading |
To Next Page
