The display resolution changes on the following ranges:
0-99.9Amps
0.1Amp resolution
100 to 1999 Amps
1Amp resolution
2000 to 5000 Amps
2.00 kAmps
10 Amp resolution (2 decimal places
indicates kAmp range)
XXXX
XX.X
X.XX
Display Resolution of the Measurements
The unit will display to .1A in RUN mode and .3A in HOLD mode.
Powering off the unit
Step 1: Press and hold the control switch until the OFF option appears and release
the switch. The unit is now powered off.
The Ampstik+ will power itself off after approximately 20 minutes of inactivity.
Page 10
To Next Page
Loading...
