Need help?Do you have a question about the SensorLink Swarm S2 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Manufacturer | SensorLink |
| Product Name | Swarm S2 |
| IP Rating | IP67 |
| Wireless Communication | Bluetooth |
| Resolution | 0.1°C (Temperature), 0.1% RH (Humidity) |
| Communication Protocol | Bluetooth Low Energy (BLE) |
| Operating Temperature | -40°C to 85°C |
Overview of the manual's purpose, scope, and structure.
Critical warnings about modifications, interference, and RF exposure limits.
Records changes made to the document across different revisions.
Lists external documents relevant to the Swarm S2 system.
Essential safety precautions for personnel, equipment, and the environment.
Specifies the necessary skills and training for installation personnel.
Details the system's purpose, specifications, and environmental ratings.
Describes the different configurations of the Swarm S2 datalogger.
Outlines the specifications and types of available ultrasound sensors.
Lists the minimum required safety gear for installation.
Detailed steps for mounting and connecting the Swarm S2 LT sensors.
Detailed steps for mounting and connecting the Swarm S2 (U)HT sensors.
Covers datalogger mechanical mounting, electrical connections, and configuration.
Guides the physical mounting of the datalogger unit.
Details connecting sensors, battery, and interface cables.
Specifics for connecting the temperature probe on UHT models.
Procedure for initial power-up and system startup.
Overview of the datalogger's operational panel, LEDs, and buttons.
Instructions for establishing communication via Bluetooth or USB.
Guide to using the software for system configuration and parameter adjustment.
Explanation of the function of micro switches on the main board.
User-adjustable settings for measurement intervals and processing.
Specific tuning parameters for ultrasound sensor readings.
Steps for setting up and provisioning ISA100.11a wireless communication.
Procedures for accessing and saving logged measurement data.
Retrieving data via the service application interface.
Information on data logging and retrieval from the µSD card.
Details the structure of data files recorded by the system.
General principles for safe use of the Swarm S2 system.
Electrical specifications and safety parameters for hazardous areas.
Information on product markings and labels for LT and (U)HT models.
Specifies environmental and operational limits for safe system operation.
Procedure for replacing the entire battery box unit.
Step-by-step guide for replacing individual battery cells.
To Next Page