Why does the red indicator light blink three times on my SentrySafe Other?
If the red indicator light blinks three times accompanied by three beeps on your SentrySafe Other, it means an incorrect code was entered. Verify the code and re-enter it. If your programmable code doesn’t work, use the factory code. If successful, re-program your personal code.
What to do if I cannot open my SentrySafe Other after entering the code?
If the door of your SentrySafe Other won't open after entering the code or combination, it could be due to a tight water-resistant gasket. Try holding the handle up while entering the code or combination, and then pull down on the handle. Also, if your safe has a key lock, make sure the key is in the unlocked position.
General| Brand | SentrySafe |
|---|---|
| Model | Fire-Safe |
| Category | Safes |
| Language | English |
To Next Page
