Introduction
1–2 700-1015 R002
1.2. System Components
The typical Trooper TL-HD system consists of the following components:
• Trooper TL-HD DVR and hard drive
• Analog cameras and camera cables, one per camera
• HD camera and camera cable
• Alarm input switch and cable
• Wiring harnesses
- power input harness with in-line fuses for constant and switched power lines
- adapter harness
- ignition input harness
- signals harness
• GPS (Global Positioning System) receiver (optional)
• SD Card (optional)
• Smart-Reach Lite Wi-fi (optional)
• Portable video monitor (optional)
• Diagnostic Button (optional)
• HDD Dock (optional)
To Next Page
Loading...
