Quick Start Guide
35
Making individual phone calls (full-duplex mode)
Calling a contact:
1. Select Menu > Phone > Contacts to open the contacts menu.
2. Navigate to a contacts folder (such as the All folder) and select your
contact. Press the Open context key, then choose the phone number.
3.
To initiate the ‘phone’ call press the Dial context key.
4. To end the call, press the Clear context key .
Calling by dialling:
1. From Home Screen, dial the number of the person you are calling.
2.
Press Send to initiate the call.
3. To end the call, press Clear.
Note: If your radio has been customised with a single dial mode for
TETRA, PBX and PSTN numbers, the dial mode icon cannot be
changed.
Receiving a phone call
When an incoming phone call is received, your radio sounds an audible
alert and displays the identity of the caller (if the contact or number is
stored in your phone book).
1. Press the Accept context key to answer the call. Press the Reject
context key to reject the call.
2. To end the call, press the Clear context key .
To Next Page
Loading...
Need help?
General
