LED indicators
Blue LED
The blue LED indicates either a missed event, such as a missed call or
unread message, or your Bluetooth
®
status (if enabled). Notifications
alerting you to the missed calls, Callouts or unread messages appear in
the Shortcut Bar. See Notifications on page20.
LED Indication Description
Flashing on for 1 second,
off for one second, on for
another second, then off
for seven seconds
Missed event
One flash every 10s Bluetooth
®
function is enabled
Continuous rapid
flashing
radio is in Bluetooth
®
discoverable
(visible) mode
Tri-colour LED
The tri-colour LED indicates the operational state of the radio.
LED Colour Description
Solid green Radio is powering on or in a call and receiving
Solid red Radio is in a call and transmitting
Intermittent
flashing red
Attempting to connect to the network or
incoming telephone SDS/Status message or
battery low warning
Flashing orange Incoming telephone call or SDS/Status message
Intermittent four
flashes orange
Transmit Inhibit mode or Fallback mode are
active
Home screen
The top level screen, known as the home screen, appears when the radio
powers on and when it is idle.
10
SC20 series – 07/2017
To Next Page
Loading...
Need help?
General
