Sepura SC2024W - Changing Character Set; Entering Characters; Deleting a Character; Entering Special Characters

Quick Start Guide
37
To change the character set:
Press the Star (*) key during text entry.
To enter characters:
Press a key repeatedly to highlight a character in its Character Selection
Box at the bottom of the screen, then press the Select context key (or wait
for the character to be auto-inserted).
To delete a character:
To delete the character to the left of the cursor press the Delete context
key.
To enter special characters:
To insert punctuation (full stop, comma, or semi-colon) press zero (0)
repeatedly until the symbol is highlighted in the Character Selection Box,
then press the Select context key (or wait for the character to be auto-
inserted).
To insert a space press 1 (on the keypad).
To insert symbols press the hash(#) key repeatedly until the symbol is
highlighted in the Character Selection Box, then press the Select context
key (or wait for the character to be auto-inserted).