A message (‘Man Down Starting’) is displayed and an alert sounds (a
succession of beeps).
2. Attach your radio in a comfortable wearing position on your body.
When a two second continuous tone finishes the radio’s ‘normal’
wearing position has been recorded. An icon indicates that Man Down
is switched on and which sensors are active.
To deactivate Man Down, either select a user profile which does not use
Man Down, or press the customised soft key to toggle Man Down off.
Man Down options
1. Press Menu then select Applications > Man Down.
2.
Select the Man Down sensors to use: Motion & Tilt sensors,
Motion Sensor only, or Tilt Only sensor.
If you enable Man Down from a User Profile, the Man Down Settings
screen updates to reflect the sensors defined as active in the Profile.
Lone Worker
If you are working alone you can use the Lone Worker feature to let your
dispatcher know that you are safe.
When Lone Worker is enabled your radio periodically sounds an alert
which you must acknowledge—usually by pressing a pre-programmed
key—otherwise the radio sends an emergency status message to your
dispatcher.
To enable Lone Worker, scroll to a user profile which has Lone Worker
enabled, then press the Select context key. See User profiles on page38.
To disable Lone Worker mode, repeat the process and choose a different
user profile.
40
SC20 series – 07/2017
To Next Page
Loading...
