17 Clearance Certificate
NOTE!
Inspection / repair of machines and machine parts is only
carried out after the opposite clearance certificate was
filled in correctly and completely by authorized and quali-
fied personnel.
NOTE!
Acceptance will be refused if parts are returned to the
manufacturer without a proper clearance certificate.
All industrial companies are obligated by the legal provisions
for occupational health, e.g. the workplaces ordinances, the
Ordinance on Hazardous Substances, the regulations for pre-
vention of accidents and the environmental protection regula-
tions such as the Waste Management Act and the German
Household Water Act to protect their employees or man and
the environment from detrimental effects when handling haz-
ardous substances.
Should special safety precautions be necessary despite careful
draining and cleaning of the product the necessary information
are to be provided.
Machines which are operated with radioactive media shall only
be inspected and/or repaired in the safety
area of the owner by a sera specialized fitter.
The clearance certificate is part of the inspection-/repair order.
sera reserves the right to refuse acceptance of the order for
other reasons.
NOTE!
Please make a copy and leave the original with the operat-
ing instructions!
(can also be downloaded from: www.sera-web.com)
To Next Page
Loading...