Serpent Viper 989 - Step 47; Step 48

35
STEp 47
47.3
47.1
SHOCKSLENGTH:
Measure the shock length
fully extended.
14.5
mm
13
mm
Assemble the spring and spring-
cup (align correctly) to complete
the shock.
Push the shock top and
the membrane into the
shock cap.
1- Fill up with sillicone oil
fully using the silicone
oil supplied in the kit.
For the correct cst value
please check the default
setupsheet.
2- Extend the shockrod fully
3- Move the shockrod
slowly up and down
to let ALL air bubbles
escape.
4- Close top only 3/4.
1-Bleed: push the
shockrod all the way
in slowly, to allow
excessive oil to escape.
2- Close the shock cap
completely.
FRONT
FRONT
REAR
REAR
47.2
STEp 48