SERV-WARE SGR-4 - Page 20

20

Conversion Kit Instructions for the
SERV-WARE
Gas restaurant ranges
Models: SGR-4, SGR-2-12G, SGR-24G,SGR-6,
SGR-2-24G, SGR-4-12G, SGR-10, SGR-6-24G,
SGR-4-36G
-
Range Conversion Kit Instructions
Do not attempt gas conversion by yourself. Gas conversion of your
unit is to be made by a certified/licensed technician.
CONVERSION
Instructions are for conversion from Natural Gas to Propane (L.P.) on all models.
The conversion should be done before connecting the unit to the gas supply.
Units are shipped from the factory equipped for use on natural gas. Parts
necessary for L.P. (liquid propane) are provided with the unit. Please refer to page
5 the orifice size list when you do gas conversion..
Turn off the main gas supply before doing any maintenance.
1. Remove the grate 2. Remove the top burner.
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer’s instructions and all applicable codes and requirements of the authority
having jurisdiction. If the information in these instructions is not followed exactly, a fire, an
explosion or production of carbon monoxide may result causing property damage,
personal injury or loss of life. The qualified service agency is responsible for the proper
installation of this kit. The Installation is not proper and complete until the operation of the
converted appliance is checked as specified in the manufacturer’s instructions supplied
with the kit.”