SERV-WARE SGR-4 - Page 22

22

15 Continue with installation.
16. Attach gas conversion label on appliance, the position below.
Gas conversion label








The position for gas conversion
17. Completed gas conversion.
Pictured is the plastic insert. Pull off insert from
octagon cap and reverse the plastic insert
position so that the L.P. position is attached to
the octa
g
on ca
p
head.
13. Before installing the included convertible
regulator, unscrew the octagon cap. You can read
(NAT) on the plastic insert attached to the head of
the ca
p;
fli
p
it over and sna
p
back in
p
lace.
L.P. Position of
insert. Regulator
is now converted
to L.P.