PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 187
Command Syntax
set access button [disabled | enabled]
set access clitimeout <value>
set access localadmin [required | optional]
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prom
pt <prompt string>
set access startupstick [disabled | enabled ]
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>
Parameters
The set access command uses the following parameters:
Sub-Parameters
The set access command uses the following sub-parameters:
To Next Page
Loading...