Server Technology PRO2 - Page 189

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 189
Command Syntax
set branch email [disabled | enabled] <name | id | ALL>
set branch load [alarmhi | alarmlo | warnhi | warnlow] <name | id | ALL> <value>
set branch load hyst <value>
set branch snmpt [disabled | enabled] <name | id | ALL>
Parameters
The set branch command uses the following parameters:
Sub Parameters
The set branch command uses the following sub-parameters:
Usage Guidelines
min <= alarmlo <= warnlo <= warnhi <= alarmhi <= max
Command Access