Server Technology PRO2 - Page 217

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 217
Sub-Parameters
The set unit command uses the following sub-parameters:
Command Access
Command Syntax
set ups addline <UPS#> <line name | id | ALL>
set ups commstr <UPS#> <get community string>
set ups delline <UPS#> <line name | id | ALL>
set ups host <UPS#> <hostname>
set ups oidspoll <UPS#> <oid>
set ups onbattery <UPS#> <value>
set ups onutility <UPS#> <value>
set ups port <UPS#> <port>
set ups type <UPS#> <value>
Parameters
The set ups command uses the following parameters: