Servonaut M24 - Diagnostic LEDs and Indications

37
Diagnostic LEDs Indication
1x red - 2x green after power-on:
7.2V battery or 2s lipo detected
1x red - 3x green after power-on:
12V battery or 3s lipo detected
slowly flashing red
no signal from receiver
slowly flashing green
receiver signal OK, motor stopped
2x green running forwards
3x green MultiBus detected
1x red 1x green running backwards
2x red 1x green overcurrent alarm
2x red 2x green overtemperature alarm
2x red 3x green low voltage cutoff alarm:
battery empty
3x red
1x, 2x or 3x green
internal errors: please
contact Servonaut