47
“Setup Functions.” Now, make certain the data formats are identical. See Appendix
VI, “RS-232 Serial Data Communications.” If data transmission or reception is still not
possible, be certain that the cable is the correct type. (When communicating with
certain types of devices, especially computers, it may be necessary to “cross” the
receive and transmit lines of the interface. That is, the receive line of the scale must
connect to the transmit line of the external device. Likewise, the transmit line of the
scale must connect to the receive line of the external device. These special cables
can be purchased from a computer dealer.) See Appendix VI for more information.
If the problem still persists, contact your dealer or Setra Systems, Inc.
To Next Page
Loading...
Need help?
General
