Setra Systems 5000C - User Manual

To Next Page

Table of Contents

Introduction ................................................................................................................. 3

Section One ................................................................................................................ 5

Installing Your Scale ................................................................................................ 5

SETUP .................................................................................................................. 5

EXPERIMENTATION............................................................................................. 5

Section Two ................................................................................................................ 6

Understanding Your Scale ...................................................................................... 6

KEYBOARD FUNCTIONS..................................................................................... 6

DISPLAY SYMBOLS ............................................................................................. 7

DISPLAY MESSAGES........................................................................................... 8

Section Three.............................................................................................................. 9

Using Your Scale ..................................................................................................... 9

ENTERING A NUMBER OR FUNCTION .............................................................. 9

CLEARING A NUMBER OR FUNCTION .............................................................. 9

RECALLING A NUMBER OR FUNCTION ............................................................ 9

CONVERTING A NUMBER OR FUNCTION ......................................................... 9

STORING A NUMBER IN A REGISTER................................................................ 9

CLEARING A NUMBER FROM A REGISTER....................................................... 9

BASIC WEIGHING.............................................................................................. 10

WEIGHING WITH THE TARE FUNCTION .......................................................... 10

WEIGHING WITH THE GROSS FUNCTION ....................................................... 10

NET TOTALIZING BY WEIGHT .......................................................................... 11

BASIC COUNTING ............................................................................................. 12

COUNTING WITH THE TARE FUNCTION ......................................................... 12

COUNTING WITH THE GROSS FUNCTION ...................................................... 13

COUNTING WITH THE AVERAGE PIECE WEIGHT FUNCTION ....................... 13

COUNTING WITH ACCURACY ENHANCEMENT.............................................. 14

REVERSE COUNTING OR KITTING .................................................................. 14

NET TOTALIZED COUNTING ............................................................................ 15

USING THE MINIMUM SAMPLE SIZE FEATURE .............................................. 16

USING THE MINIMUM ACCURACY FEATURE ................................................. 16

ACCUMULATING RESULTS .............................................................................. 17

ASSIGNING AN I.D. NUMBER TO A BATCH .................................................... 18

FAST OR SLOW UPDATE (“INT” MODE) ........................................................... 18

PRINTING OUT INFORMATION......................................................................... 19

BAR CODING INFORMATION ........................................................................... 19

INTERFACING WITH A COMPUTER.................................................................. 19

COUNTING WITH APW VALUES IN EXPONENTIAL NOTATION...................... 19

Section Four .............................................................................................................. 20

Dual Scale Operation ............................................................................................ 20

INSTALLING A DUAL SCALE SYSTEM ............................................................. 20

USING A DUAL SCALE SYSTEM ....................................................................... 21

Main Page

Need help?

Do you have a question about the Setra Systems 5000C and is the answer not in the manual?

Setra Systems 5000C Specifications

General

Output Signal	4-20 mA, 0-5 VDC, 0-10 VDC
Operating Temperature	-40°C to 85°C (-40°F to 185°F)
Pressure Port	1/4" NPT
Capacity	5000 psi
Calibration	Factory calibrated
Power Supply	12-30 VDC
Interface	Analog
Units	psi, bar, kPa, MPa, kg/cm², inHg, inH2O, ftH2O, mmHg, mbar