9
Section Three
Using Y our Scale
ENTERING A NUMBER OR FUNCTION
To enter a number or function on your scale, simply press the key or keys which
correspond to the numbers or functions you wish to enter. No key is necessary to
request the weighing function, as it is automatically displayed when the scale is
plugged in and something is placed on the pan.
CLEARING A NUMBER OR FUNCTION
To clear the last function or number you entered on the scale’s keyboard, simply
press the clear key. This automatically returns your scale to the weighing mode.
RECALLING A NUMBER OR FUNCTION
Your scale is equipped with several memory registers which facilitate the storage of
weights and numbers, as well as the calculation of related functions (such as
average piece weight). Once a value has been stored in a specific memory register it
can be recalled to the display by pressing the ./rcl key, and the register key you wish
to recall. For example, to recall the value stored in the tare register, press ./rcl , tare .
CONVERTING A NUMBER OR FUNCTION
To convert from one unit of measure to another, simply press the conv key. Each time
you press the key, you are converting to the units next in line in the scale’s program.
Continue pressing the conv key until the units you wish to use are displayed. The
order of units is as follows: GRAMS - OUNCES - POUNDS - TROY OUNCES -
PENNYWEIGHTS - CARATS - T UNITS - X UNITS - GRAMS.
STORING A NUMBER IN A REGISTER
To store a displayed number in a particular memory, simply press the register key
(the tare key for example). The number is now stored in the register, and the scale is
ready to continue weighing. (See above to recall the stored value.)
CLEARING A NUMBER FROM A REGISTER
To clear the number stored in a register, simply store a value of 0 in place of the
number previously stored.
Note: The ACCUM register acts differently from other registers, as it adds the
displayed value to an existing stored value. See the section on "Accumulating
Results" for detailed information on storing and clearing a number in the
ACCUM register.
To Next Page
Loading...
Need help?
General
