12
BASIC COUNTING
To count the number of like objects placed on your scale, use the following proce-
dure:
1. Press the zero key.
2. Place a known number of pieces on the pan.
3. Enter the number of pieces you have placed on the pan.
4. Press the count key.
5. Add pieces to continue counting.
6. Wait for the "ok" symbol, then read the total number of pieces from the display.
COUNTING WITH THE TARE FUNCTION
To count like objects using a container without including the weight of a container,
use the tare function. The container weight is subtracted from the display and stored
in the tare register before you begin counting. To tare out the weight of a container,
and then count the contents placed into it, use the following procedure:
1. Press the zero key.
2. Place the container on the pan.
3. Press the tare key.
4. Place a known number of pieces in the container.
5. Enter the number of pieces you have placed in the container.
6. Press the count key.
7. Add pieces to continue counting.
8. Wait for the "ok" symbol, then read the display. The scale will read the total
number of pieces you have placed in the container.
Note: You may also use the tare function in combination with the advanced functions
explained throughout this guide.
To Next Page
Loading...
Need help?
General
