17
SETTING THE BAUD RATE
The balance is capable of interfacing with a wide variety of computer de-
vices. To set the baud rate (the rate at which the scale communicates with a
computer or printer) and parity, use the following procedure:
STEP 1.
TARE
POWER
MODE
FUnC
0.00
Hold down the TARE key then press the MODE key. Release both keys, the
display will read “FUnC”.
STEP 2.
MODE
TARE
POWER
bAUd
FUnC
Press the TARE key twice, the display will read “bAUd” for baud rate.
Note: To escape anytime during this procedure, press the TARE key until
"ESCAPE" is displayed and press the MODE key.
STEP 3.
MODE
TARE
POWER
300bAUd
Press the MODE key to enter the baud rate menu. The display will read 300. To
view the other baud rates press the TARE key repeatedly.
STEP 4.
MODE
TARE
POWER
PArI7Y
2400
When the desired baud rate is displayed, press the MODE key to select it. The
display will then read “PArITY”.
To Next Page
Loading...
Need help?
General
