9
4. Remove the container.
5. Place the empty container on the pan.
6. Fill the container until “100%” is displayed and the ok LED is lit.
7. Empty the container.
8. Repeat Steps 5 - 7 as many times as desired.
9. Press UNITS to return to weighing.
CHANGING THE DISPLAY RESPONSE RATE
The MODE key is factory preset to allow you to modify the display response
rate. The default is Automatic and provides a fast display response (short
integration time) when the balance senses large changes in weight and a
slow display response (long integration time) when sensing small changes
in weight. The MODE key can be used to provide a constant FAST display
response rate for filling operations or a SLOW display response rate for
weighing in the presence of vibration. To change display response rates,
simply press the MODE key repeatedly until you have selected the desired
response rate.
FILLING TO A TARGET WEIGHT
The MODE key is used to enter a FAST response rate for filling operations.
1. Press the MODE key. The FAST LED should be lit.
2. Place a container on the pan and press the TARE key.
3. Pour to the targeted weight.
4. Return to the automatic weighing mode by pressing the MODE key
twice.
WEIGHING IN THE PRESENCE OF VIBRATION
The MODE key is used to enter a SLOW display response rate for weighing in
the presence of vibration.
1. Press the MODE key twice. The SLOW LED indicator should be lit.
To Next Page
Loading...
Need help?
General
