Seville Classics OFF65803 - Install Support Brackets

10
Assembly Instructions: Install Support Brackets
M8x25 Bolt
Bolt Sleeve
6mm Allen Wrench
Tighten /w 6mm Allen Wrench
STEP 3. Slide SUPPORT BRACKET (D) into the SUPPORT BEAM (B).
Support
Bracket
Tighten /w 6mm
Allen Wrench
Tighten /w
6mm Allen
Wrench
Insert BOLT SLEEVES (P) through holes on SUPPORT BEAM (B) and LEG (C).
Insert M8x25 BOLTS (K) into sleeves and tighten with 6mm ALLEN
WRENCH (J).
Then, tighten inner 6mm bolts with a 6mm ALLEN WRENCH (J).