12
Assembly Instructions: Align Frame
STEP 6. Insert WASHERS (Q) between the SUPPORT BRACKETS (D) and the
TOP (A). Washers t into the three mounting holes on each support bracket.
STEP 5. With 2 people, pull or push the SUPPORT BEAM (B) to align the
mounting holes on the SUPPORT BRACKETS (E) with the TOP (A).
Seville Classics
®
Ergo Table Top features pre-installed mounting anchors.
TIP: Frame is symmetrical and should be installed
so that the CONTROL BOX (F) is near a power outlet.
Washer (x3)
Support
Bracket
110-120V
To Next Page
Loading...
