Seville Classics OFF65803 - Unlock Beam

11
Assembly Instructions: Unlock Beam
STEP 4. Unscrew the eight M6x6 BOLTS (N) marked in the diagram
below from SUPPORT BEAM (B) with 3mm ALLEN WRENCH (H).
This unlocks the SUPPORT
BEAM (B) and allows it to be
extended, or shortened to
accommodate dierent sizes of
desk tops.
Screw the bolts back in to apply
tension against the support
beam and lock the top's width
after aligning the base with the
desk top appropriately.
Unscrew
3mm Allen Wrench