Need help?Do you have a question about the SEW-Eurodrive BST 1.2S-230V-00 and is the answer not in the manual?
General| Brand | SEW-Eurodrive |
|---|---|
| Model | BST 1.2S-230V-00 |
| Category | Control Unit |
| Language | English |
Discusses critical safety conditions and procedures during startup and operation.
Defines the safe state of the BST brake module as the de-energized condition of the brake.
Explains the safety mechanism involving external safety switching devices and voltage disconnection.
Describes the SBC (Safe Brake Control) safety function for safe brake operation.
Lists approved SEW disk brakes compatible with the BST module.
Details mandatory requirements for the installation of the BST module.
Specifies requirements for external safety controllers to ensure proper safety function.
Outlines necessary checks and documentation for safe product startup.
Lists essential requirements for the safe operation of the BST module.
Provides a detailed table of terminal connections and their functions for wiring.
Illustrates wiring diagrams for double-pole disconnection of the safety control voltage.
Illustrates wiring for single-pole disconnection, recommending bipolar for safety.
Shows wiring diagrams for SBC with STO using MOVIDRIVE B inverter.
Shows wiring diagrams for SBC with STO using DFS11B/21B fieldbus interface.
Illustrates wiring diagrams for disconnecting group drives from the system.
Lists safety characteristics and certifications according to EN ISO 13849-1.
To Next Page