Need help?Do you have a question about the SEW-Eurodrive MOVISAFE DCS22B and is the answer not in the manual?
General| Type | MOVISAFE DCS22B |
|---|---|
| Category | Control Unit |
| Power Supply | 24 V DC |
| Number of safe outputs | 2 |
| Protection Class | IP20 |
| Safety category | PL e, SIL 3 |
Covers intended applications, limitations, and general installation guidelines.
Outlines electrical connection procedures and operational safety precautions.
Explains the two-channel architecture and diagnostic mechanisms for fault detection.
Describes various standard safety functions supported by the MOVISAFE® modules.
Guides on installing the DCS..B option, including size limitations and slot usage.
Details the function of each terminal and LED on the DCS..B option for wiring.
Describes the 8 digital inputs and their use with sensors.
Covers connecting standard incremental and absolute encoders.
Covers prerequisites and general information for successful startup.
Details how to check if the required performance level is achieved for safety functions.
Classifies messages into fatal errors, alarms, and ECS messages for troubleshooting.
To Next Page