Need help?Do you have a question about the SEW-Eurodrive MOVITRAC LT Series and is the answer not in the manual?
General| Product Type | Frequency Inverter |
|---|---|
| Series | MOVITRAC LT |
| Protection Class | IP20 |
| Control Method | V/f control |
| Output Voltage | 0 to input voltage |
| Ambient Temperature | -10 °C to +50 °C (derating may apply above 40°C) |
| Relative Humidity | ≤95% (non-condensing) |
| Altitude | Up to 1000 m above sea level (derating may apply above 1000m) |
Guidance on utilizing the operational documentation effectively.
Explanation of how safety information is organized within the document.
Conditions for warranty claims and adherence to instructions.
Disclaimer regarding SEW-EURODRIVE's liability for improper use.
Legal notice regarding intellectual property rights and usage restrictions.
Guidelines for environmentally sound disposal of product components.
Introduction to fundamental safety precautions for frequency inverters.
Broad safety directives and warnings for operation and maintenance.
Identification of qualified personnel for mechanical and electrical work.
Specifies approved applications and standards for frequency inverters.
Instructions for inspecting and handling shipments to prevent damage.
Guidelines for safe and correct installation and assembly of units.
Procedures and regulations for safe electrical connections.
Requirements for ensuring safe power disconnection of units and circuits.
Precautions for safe startup and initial operation of the equipment.
Safety measures during ongoing operation and maintenance activities.
Steps to take before installing the option card.
Detailed steps for physically installing the option card.
Lists the MOVITRAC® models compatible with this option card.
Describes the purpose and typical applications of the second analog input.
Provides specifications for the analog input functionality.
Details the terminal connections and signal assignments for the option card.
Explains how to configure and use the second analog input.
Lists the MOVITRAC® models compatible with the second relay output.
Describes the function and typical applications of the second relay output.
Details the terminal connections and signal assignments for the relay output.
Provides specifications for the second relay output.
Explains how to program and use the second relay output.
Lists the MOVITRAC® models compatible with the third relay output.
Describes the function and typical applications of the third relay output.
Details the terminal connections and signal assignments for the third relay output.
Provides specifications for the third relay output.
Explains how to program and use the third relay output.
Lists compatible MOVITRAC® models for the two indicator relay.
Explains the purpose of the two indicator relay option.
Details the terminal connections for the two indicator relay.
Provides specifications for the two indicator relay.
How to configure the two indicator relay for LTE-B models.
How to configure the two indicator relay for LTP models.
Lists compatible MOVITRAC® models for the PI controller.
Explains the PI controller's function and benefits for feedback control.
Details the terminal connections and signal assignments for the PI controller.
Provides specifications for the PI controller.
How to set up and operate the PI controller card.
Lists compatible MOVITRAC® models for the converter card.
Explains the function of the converter card for digital inputs.
Details the terminal connections and signal assignments for the converter card.
Provides specifications for the converter card.
How to configure the converter card for different input types.
Lists compatible MOVITRAC® models for the local switchboard.
Explains the function of the local switchboard as an auxiliary control.
Details the terminal connections for the local switchboard.
Provides specifications for the local switchboard.
To Next Page