Need help?Do you have a question about the SEW-Eurodrive MOVIDRIVE B and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Series | MOVIDRIVE B |
| Protection Class | IP20 |
| Control Method | V/f control |
| Communication Interfaces | CANopen |
| Relative Humidity | 5 - 95 %, non-condensing |
Specifications for using 60/75 C copper wire and terminal tightening torque for MOVIDRIVE B.
Information on the short-circuit current rating for MOVIDRIVE B models.
Requirements for branch circuit protection for MOVIDRIVE B units.
Details on motor overload protection settings for MOVIDRIVE B.
Suitable ambient temperature ranges and derating for MOVIDRIVE B.
Wiring diagram for MOVIDRIVE B power section and brake (sizes 1-6).
Wiring diagram for MOVIDRIVE B power section and DC power supply unit (size 7).
Wiring diagrams for different MOVIDRIVE B braking resistor types.
Specifications for using 60/75 C copper wire and terminal tightening torque for MOVIDRIVE compact.
Information on the short-circuit current rating for MOVIDRIVE compact models.
Requirements for branch circuit protection for MOVIDRIVE compact units.
Details on motor overload protection settings for MOVIDRIVE compact.
Suitable ambient temperature ranges and derating for MOVIDRIVE compact.
Wiring diagram for MOVIDRIVE compact power section and brake.
Wiring diagrams for different MOVIDRIVE compact braking resistor types.
Specifications for using 60/75 C copper wire and terminal tightening torque for MOVIDRIVE A.
Information on the short-circuit current rating for MOVIDRIVE A models.
Requirements for branch circuit protection for MOVIDRIVE A units.
Details on motor overload protection settings for MOVIDRIVE A.
Suitable ambient temperature ranges and derating for MOVIDRIVE A.
Wiring diagram for MOVIDRIVE A power section and brake.
To Next Page