SEW-Eurodrive MOVIMOT flexible MMF3 C/DBC Series - Page 179

7
Operation
Manual mode with MOVISUITE®
Operating Instructions – MOVIMOT
®
flexible
179
7.3.2 Control in manual mode
Manual operation window
Once manual mode has been successfully activated, you can control the device using
the controls in the MOVISUITE
®
"Manual mode" window.
36028819001133963
Controller
1. Set the setpoint speed using the edit box [3] or graphic input [6].
2. To specify the direction of rotation, click the button [4].
3. To enable the device, click the button [7].
4. To stop the device, click the button [5].
The "Speed" group [2] shows the actual speed of the device.
29129451/EN – 12/2019