SEW-Eurodrive MOVIMOT flexible MMF3 C/DBC Series - Page 269

9
Inspection and maintenance
Inspection and maintenance work
Operating Instructions – MOVIMOT
®
flexible
269
7. Check the installation and startup of the device using the applicable operating in-
structions.
8. Place the electronics cover on the connection box again and fasten it.
ð Proceed as follows when installing the electronics cover: Insert the screws and
tighten them in diametrically opposite sequence step by step with a tightening
torque of 6.0Nm.
1
2
4
3
4
2
3
1
5 min
30561568651
29129451/EN – 12/2019