Sewha SI 480E - Write Command Data Formats; Time and S;N Setting Formats

38
SI 480E DIN SIZE WEIGHING CONTROLER
Time setting
ASCII : STX ID(2Byte) WTIM Time (6byte)ETX
Ex) Time : 12:00:00
SI 480E response
normal: STX ID ACK ETX error: STX ID NAK ETX
Change S/N
ASCII : STX ID(2Byte) WSNO S/N(6byte)ETX
Ex) S/N is changed to 100
SI 480E response
normal: STX ID ACK ETX error: STX ID NAK ETX
Recommended Comm. Interval of WRITE COMMAND is Min. 100ms.
Comm. Interval of WPRT is Min.300ms
You have to guarantee Min. 100ms interval between two different commands.
Response for WPRT will be output through Print Port, set by F32-0.