Sewha SI 550 - Page 8

- 8 -
SI 510 WEIGHING INDICATOR
3-3-1. Key operation
- Press 4 times within 3secs, to enter to Function setting mode.
- Press 4 times within 3secs, to enter to “Hidden function” mode.
- Make the Weight Value to Zero
- Number 1
- Set the Tare Function
- Number 2
- Use for Run weighing
- Number 3
- Set the Formula
- Number 4
- Set the BIN value
- Number 5
- Use for stop
- Number 6
- Set preset value of current Bin
- Number 7
- Use for DRIB setting
- Number 8
- Use for FREE FALL setting
- Number 9
- Use for Print out
- Number 0
- Cancel or Move to Previous Step.
- Save and Move to Next Step.