To Next Page
J
Jennifer LittleJul 26, 2025
Why my SFA Water Pump doesn’t start?
- SStephanie DanielsJul 26, 2025
If your SFA Water Pump doesn't start, several factors could be the culprit. First, ensure the unit is properly plugged into the power supply. If it is, verify that the lock pin has been removed. Also, make sure the unit is level using a leveling tool. Check your main power to rule out a power outage. A blocked float can also prevent the pump from starting, so clean the tank. Finally, inspect the condensate inlet pipe for blockages and clean it if necessary.
General
