Do you have a question about the SFA SANIPACK P30 and is the answer not in the manual?
Discharge Pipe Diameter | 32 mm |
---|---|
Motor Power | 400 W |
Voltage | 220-240 V |
Horizontal Discharge | 50 m |
Vertical Discharge | 5 m |
Maximum Head | 5 m |
Maximum Horizontal Reach | 50 m |
Inlet Connections Size | 40 mm |
Outlet Connection | 32 mm |
Protection Rating | IP44 |
Product Type | Macerator |
Type | Macerating Pump |
Details the SANIPACK® macerator/pump, its design, and intended use for sanitary fixtures.
Provides specifications such as application type, voltage, current, temperature, and weight.
Chart illustrating the relationship between vertical distance and flow rate for the unit.
Guidance on acceptable combinations of vertical and horizontal pumping runs.
Illustrates installation configurations for the unit to allow for service access.
Instructions for connecting the macerator to a wall-hung or back-outlet toilet.
Details on connecting shower and sink waste to the unit's side inlets.
Procedure for connecting a vent system to the macerator unit.
Guidance on installing the discharge elbow, check valve, and pipe.
Instructions for safely connecting the unit to a GFCI-protected electrical outlet.
Details correct usage, prohibited items, and precautions for power loss or freezing.
Provides instructions on how to clean and maintain the SANIPACK® unit.
Lists common symptoms, their probable causes, and recommended remedies for unit issues.
Covers pipe supports, bends, pipe work, discharge, freezing, and electrical safety.
Details the 2-year warranty terms, conditions, limitations, and contact information.