SFE 95-STD1 - Display; Service

4.4 Display
Key:
1. Service status icon;
2. Weekdays icon;
3. Time display mode icon;
4. Programming parameters/regeneration status/time digit;
5. Power supply status icon (if it is enabled it indicates a lack of mains supply and
storage of the programming data to the memory);
6. Regeneration in progress icon.
The LCD display used on the controller shows a series of operation-related data.
The data displayed are:
4.4.1 Service
When the module is in operation, the display shows the following information:
• Time: xx:xx with flashing “:”.
• Weekday, if the day of the week is flashing it means that the regeneration is enabled for
that day.
• Service icon
• Residual volume and time are displayed alternately, if volume regeneration is enabled.
In service
SFE
E
N
G
L
I
S
H
23
2
1
6
5
4
3