SHARE FL Series - Network, Sound, and Port Issues

FL Series Cloud Computer
-
24
-

When the player installation appear code for 1001 wrong tip.
Please input “cmd” on start->run, open the console, and input "sc delete
Terminal Service", key Enter, exit console, and reinstall again.
No sound on remote desktop mode
Please exit remote interface, back to control panel in welcome page, check
whether mute are selected in display and voice or not. If the video is still no
sound, please check whether the sound service is running in task manager or
not,if running, then terminate the service and reopen.
How to modify server port?
1.Open start->run , input “regedit”, open the registry, go in the path
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TerminalServ
er\Wds\rdpwd\Tds\tcp]
Find out “PortNamber”, its default value is 3389, you can changed to which port
you want, e.g 3380,Pay attention to use the decimal.
Turn it on again
2.[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TerminalSer
ver\WinStations\RDP-Tcp]
Find out “PortNamber”,it default value is 3389,you can change to which port
you want, such as 3380. Pay attention to use the decimal.If the Windows
system is XP or 2003, just reboot system and use the port 3380 for remote
desktop connection.
3.[In Vista or Win7, the Client is still unable access to remote desktop
connection. Because the Vista or Win7 has own firewall. You also need to
modify firewall policy through registration list.
Go in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAcce
ss\Defaults\FirewallPolicy\FirewallRules],Find out “RemoteDesktop-In-TCP”,
changed all of 3389 to 3380, and go in again
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SharedAcce
ss\Parameters\FirewallPolicy\FirewallRules],Find out “RemoteDesktop-In-TCP”,
changed all of 3389 to 3380 ,save and reboot computer will only take effect,
then you can use the port 3380 for remote desktop connection in future.
How to set up the display resolution for device?