Shark Cordless Detect Pro IW1600 Series User Manual

sharkclean.comsharkclean.com
ODOR NEUTRALIZER TECHNOLOGY
ODOR CARTRIDGE REPLACEMENT
Flip up the handle and rotate the dial clockwise
until the two arrows are aligned. Pull the handle
to remove the dial from the auto-empty dock.
Rotate the cartridge counterclockwise in
the dial housing and pull out the cartridge to
remove it.
Align the yellow arrow on the side of the cartridge
with the yellow arrow on the side of the dial
cover, then insert the cartridge into the dial.
Rotate the cartridge clockwise to lock it in place.
Dispose of the old cartridge by dropping it
into the trash.
Remove the new odor cartridge from the
sealed packaging. To maintain the life of
the cartridge, keep it in the sealed
packaging until you are ready to install it.
Align the teal arrow on the dial cover with the
arrow on the auto-empty dock, then reinsert
the dial into the auto-empty dock. Rotate the
dial counterclockwise until it clicks into an
intensity setting to engage. Rotate further to
change the intensity setting.
1. REMOVE ODOR DIAL
FROM THE AUTO-EMPTY DOCK
2. REMOVE OLD ODOR
CARTRIDGE
3.REMOVE NEW CARTRIDGE
FROM BAG
5. INSTALL DIAL IN THE
AUTO-EMPTY DOCK
4. INSTALL NEW CARTRIDGE
IN DIAL
6. USED CARTRIDGE
DISPOSAL
NOTE: Odor cartridges should be replaced every
6 months for optimal odor neutralizer technology
performance.
TURN UNTIL
CLICK TO LOCK
ODOR NEUTRALIZER TECHNOLOGY
ODOR NEUTRALIZER TECHNOLOGY TIPS
ADJUSTING THE ODOR INTENSITY
Flip up the dial handle and rotate the odor dial
to adjust odor neutralizer technology intensity
or to unlock the dial for cartridge access.
ODOR DIAL
NOTES: • The odor dial needs to be installed for the vacuum to function properly, with or without the odor cartridge.
• Odor Neutralizer technology eectively deodorizes while interacting with odors from inanimate sources.
Insertion/Removal: Rotate the odor dial to align the teal arrows. Remove the dial to access
the odor cartridge for removal or replacement.
Low: Rotate the dial toward the Low position to decrease the intensity to the lowest level
when the vacuum is in use.
High: Rotate the dial toward the High position for the highest intensity level when the
vacuum is in use. This position is the recommended setting for optimal performance.
Odor Dial Must be Installed for Vacuum to Function Properly
• Remove odor cartridge from dial if you don’t want the benefits of the odor
neutralization technology.
Maintenance Required
• Clean all filters as recommended under Cleaning Filters.
• Empty the dust cup before storing your vacuum.
• Replace the cartridge as recommended under Odor Cartridge Replacement.
• Visit qr.sharkclean.com/odortech to learn more and purchase replacements.
• If wet pet messes are cleaned up, thoroughly clean the vacuum.
Fragrance Strength Over Time
• The intensity of the odor neutralizer technology’s fragrance may diminish over time. It may also
have no noticeable fragrance at all. This is natural and does not indicate the technology
isn’t working. Follow replacement instructions to ensure continued performance.

Shark Cordless Detect Pro IW1600 Series Specifications

General

Brand	Shark
Model	Cordless Detect Pro IW1600 Series
Category	Vacuum Cleaner
Language	English