sharkclean.eusharkclean.eu
ASSEMBLY
ASSEMBLY
1. Lift the Floor Nozzle Tube, pushing it firmly until it stands upright. The Retractable Wheels will extend
so the vacuum can stand on its own.
2. Insert the Wand into the floor nozzle tube.
3. Attach the Lift-Away
®
Pod to the wand.
4. Snap the Accessory Holder onto the wand, then place accessories in the holder.
Ensure all connections click securely into place.
(Click)
(Snap)
(Click)
1
1
2
CLEANING MODES
NOTE: Accessories are compatible with both the wand and integrated hose.
To vacuum in upright mode, plug in the power cord,
then press the Power button on the back of the
handle. Step on the footprint icon on the floor nozzle
and tilt the handle back to activate the brushroll.
The retractable wheels will automatically slide back
for easy maneuverability while vacuuming.
To clean with the Lift-Away pod, detach it by pressing
the Pod Release button. Attach an accessory for more
reach when cleaning above-floor areas like stairs and
furniture. For added flexibility and reach, slide the cuff
down to extend the hose.
NOTE: When finished with the hose, slide the hose
cuff back into place.
UPRIGHT
LIFT-AWAY® POD WITH HOSE
To clean above-floor areas with the wand, remove
it from the floor nozzle and add an accessory. To
detach the wand, stand the vacuum upright, then
step on the release pedal and pull up the wand.
For even more reach and flexibility with the
wand, slide the hose cuff down to extend the
integrated hose.
NOTE: When finished with the hose, slide the
hose cuff back into place while reattaching the
wand to the pod.
ABOVE-FLOOR WITH WAND
WAND WITH EXTENDED HOSE
OR
To Next Page
Loading...
Need help?
General
