To remove the dust cup from the handheld vacuum,
press the Dust Cup Release button near the handheld
vacuum nozzle. Tilt the dust cup and lift off to remove.
To empty dust and debris, hold the dust cup over the
bin, then slide the Lid Release slider forward.
Remove debris from the dust screen by tapping it
gently or wiping it with a dry cloth as needed. To
clean the interior of the dust cup, rinse it with water.
Place it on its side to air-dry for at least 24 hours
before reinstalling.
MAINTAINING YOUR VACUUM CLEANER
CLEANING THE FILTERS
To clean filters, rinse them with water only. Allow all filters to air-dry completely for at least 24 hours
before
reinstalling to prevent liquid from being drawn into electric parts. Clean the pre-motor filters at least
once
a month and post-motor filter at least once a year. Tap off loose dirt between washes when needed.
More
frequent cleaning may sometimes be necessary with heavy use.
IMPORTANT: DO NOT use soap when cleaning the filters. Use water only.
To Next Page
Loading...
