DK33-288080H-B or Yinli
YLS0483A-U2880802. Use of an
incorrect charger may result in no
charging, and/or unsafe conditions.
Use only Shark® battery XSBT700EU.
34. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals increases the risk of fire
or burns.
35. Under abusive conditions, liquid may
be ejected from the battery. Avoid
contact with this liquid, as it may
cause irritation or burns. If contact
occurs, flush with water. If liquid
contacts eyes, seek medical help.
36. Battery should not be stored at
temperatures below 37.4°F (3°C)
or above 104°F (40°C) to maintain
long-term battery life.
37. DO NOT charge battery at temperatures
below 40°F (5°C) or above 104°F (40°C).
38. Store the appliance indoors. DO NOT use
or store it below 37.4°F (3°C). Ensure the
appliance is at room temperature before
operating.
39. DO NOT expose the battery to fire
or temperatures above 265°F (130°C)
as it may cause explosion.
Contents [ hide
1 ASSEMBLING YOUR SHARK® VACUUM CLEANER
2 USING YOUR LITHIUM ION POWER PACK BATTERY
3 USING SMART RESPONSE TECHNOLOGY
4 CLEANING MODES
5 USING THE FLEXOLOGY® WAND
6 FLEXOLOGY® STORAGE
7 MAINTAINING YOUR VACUUM CLEANER
8 REMOVING AND CLEANING THE DUST CUP
9 MAINTAINING YOUR VACUUM CLEANER
10 MAINTAINING YOUR VACUUM CLEANER
11 MAINTAINING YOUR VACUUM CLEANER
12 TROUBLESHOOTING GUIDE
13 ADDITIONAL ACCESSORIES AVAILABLE ON SHARK® ACCESSORIES.EU
14 FIVE (5) YEAR LIMITED GUARANTEE
15 TWO (2) YEAR LIMITED BATTERY GUARANTEE
16 Read More About This Manual & Download PDF:
17 Related Manuals:
ASSEMBLING YOUR SHARK® VACUUM CLEANER
1. Insert the wand into the floor nozzle, pressing it in until it clicks securely into place.
2. Insert the handheld vacuum into the top of the wand, pressing it in until it clicks securely into
place.
For proper operation, ensure all components are completely connected and clicked into place..
To Next Page
Loading...
Need help?
General
