MAINTAINING YOUR VACUUM CLEANER
CHECKING FOR BLOCKAGES
Checking for Blockages in the Handheld Vacuum:
1. Turn off vacuum.
2. Remove the handheld vacuum from the wand.
3. Check all intake openings to the dust cup and
remove any debris or blockage
Checking for Blockages in the Wand:
Flexology® Wand:
1. Turn off vacuum.
2. Remove the handheld vacuum and floor nozzle
from the wand.
3. Check the clog access on the Flexology® portion
of the wand by pinching the tabs on either side of
the hose and lifting the hose out for wand access.
4. Clear any debris and blockages.
Checking for Blockages in the Floor Nozzle:
1. Turn off vacuum.
2. Detach the wand.
To Next Page
Loading...
