CLEANING THE BRUSHROLL CLEANING THE BRUSHROLL
MAINTENANCE MAINTENANCE
Push up on the tabs on the brushroll access door,
then lift o the door.
Lift out the brushroll. Remove the cap on the end
of the brushroll. Clean o any hair or debris, then
replace cap.
Reinstall the brushroll, inserting the flat end first.
Close the brushroll access door and press down
until it clicks into place.
NOTE: When removing the brushroll cap, make sure to not let the bushing inside the cap fall out. When cleaning
brushroll, be sure to not cut anything other than hair, string, fibers, or other debris.
CLEAN BRUSHROLL EVERY WEEK.
REPLACE BRUSHROLL EVERY 6 to 12 MONTHS. See sharkaccessories.com for replacement parts.
CLEAN BRUSHROLL EVERY WEEK.
REPLACE BRUSHROLL EVERY 6 to 12 MONTHS. See sharkaccessories.com for replacement parts.
Clean the brushroll periodically and whenever hair
appears.
To Next Page
Loading...
Need help?
General
