To Next Page
N
Natalie WilliamsSep 8, 2025
What to do if the front bumper of my Shark IQ ROBOT SELF EMPTY XL UR1005AE is jammed?
- Mmonique87Sep 8, 2025
Clean the bumper and make sure it moves in and out freely.
What to do if the front bumper of my Shark IQ ROBOT SELF EMPTY XL UR1005AE is jammed?
Clean the bumper and make sure it moves in and out freely.
How to resolve BotBoundary error on Shark IQ ROBOT SELF EMPTY XL UR1005AE Vacuum Cleaner?
Move your robot to a flat surface away from the magnetic boundary strip and try cleaning again.
What to do if a drive wheel is stuck on my Shark IQ ROBOT SELF EMPTY XL UR1005AE?
Clean the wheels and remove any debris wrapped around the axles so they can move freely.
What to do if my Shark Vacuum Cleaner has a problem when mapping?
Resolve the issue and restart the robot from the same spot. Make sure to open interior doors in rooms to be cleaned and that the robot is operating in well-lit areas.
What to do if my Shark IQ ROBOT SELF EMPTY XL UR1005AE Vacuum Cleaner cannot generate a map?
Avoid picking up or moving the robot or the base. If either are relocated, the robot may not be able to generate a map or find its way back to the base.
What to do if there is a cliff sensor error on my Shark IQ ROBOT SELF EMPTY XL UR1005AE Vacuum Cleaner?
Move your robot to a new location and clean its clif fsensors.
General| Model | UR1005AE Series |
|---|---|
| Type | Robot Vacuum |
| Self-Emptying | Yes |
| Dust Bin Capacity | 0.5 liters |
| Mapping | Yes |
| Battery Life | Up to 90 minutes |
| Filter Type | HEPA |
| Battery Type | Lithium-ion |
| Brushroll Type | Self-Cleaning Brushroll |
| App Compatibility | Shark Clean App |
| Bagless | Yes |
| Wi-Fi Connectivity | Yes |
| Recharge and Resume | Yes |
| Color | Black |
| Cleaning Modes | Auto, Spot, Manual |
| Voice Control | Amazon Alexa, Google Assistant |
| Included Accessories | Self-Empty Base, Filter |
Covers basic precautions and electrical safety for appliance use.
Details warnings for operating the robot vacuum, including handling and restrictions.
Steps to properly charge the robot on its base.
Utilize interactive maps, room select, scheduling, and cleaning reports.
Instructions for emptying the robot's internal dust bin.
Procedure for emptying the self-empty base's debris bin.
How to clean and replace the robot's internal filter for optimal suction.
Maintenance guide for pre-motor and post-motor filters in the charging base.
Maintaining sensors and charging contacts for optimal robot performance.
Resolving issues based on specific error codes displayed by the robot.
